Specifications

• Material: C-1035, SA-182-F11, F22, Stainless Steel
• Threads: U.N.C./U.N.F. Class 2B, Right or Left Hand, Metric
• Finish: Self-Colored, Galvanized, Plated, Electro-Polished
• Options: Heat Treating, Special Threading
• Note: Pins Sold Separately – Straight or Headed 100% Domestic Materials, Certifications Provided Upon Request

Working Loads

Maximum working loads have been established with a design factor of 5:1 or 3:1 (AISC) using the maximum pin diameter, the resulting net area of the eye at the pin hole, and the expected ultimate tensile strength of C-1035 steel. The maximum tap size (U dimension) shown in Table II is for reference purposes only and should be used only to determine the largest tap diameter the clevis may accommodate without considering the pin diameter. Use Table I to select the proper combination of tap size and pin diameter for any given size of clevis.

For any combination of tap size and pin diameter shown, the pin in double shear will develop the strength of the rod if both the rod and pin are made from steel having the same physical properties. The pin must be investigated for bending. If inadequate, a larger diameter pin must be selected.

If the pin is made from steel with physical properties lower in value than the steel used for the rod, the pin may not develop the strength of the rod and either shear or bend. A larger pin diameter would then be required.